Teledyne 3300TB, Operating Instructions Manual, Page: 34 / 51

Trace Oxygen Analyzer Operation
Teledyne Analytical Instruments 21
Operation
4.1 Introduction

Once the analyzer has been mounted, the gas lines connected
and the electrical connections made, the Analyzer can be
configured for your application. This involves setting the
system parameters:
• Defining the user selectable analysis ranges.
• Setting alarm setpoints.
• Calibrating the instrument.

All of these functions are performed via the front panel
controls, shown in Figure 4-1.
Analyzing for the trace oxygen level in the gas passing through the
cell block is the default mode of operation. As long as no front panel
buttons are being pressed the Unit is analyzing.
Figure 4-1: Front Panel Controls and Indicators