Teledyne 2103Ci, Installation And Operation Manual, Page: 18 / 74

2103 Modem Module
Section 2 Preparation and Installation
2-6
For your reference, the modem cable uses a 5-pin amphenol
socket, MS3106A-5S.
Figure 2-3 2103 Modem Cable Connector
2.4 Antenna (2103Ci Only)
The 2103Ci uses a magnetic mount antenna and Serial Over
Internet Protocol (SOIP) communication to connect with other
units. (The module is also capable of CSD communication, but
this service is being phased out. See Section 2.6.2 for complete
information.) Phone service with a static IP address, rather than
a land line, provides efficient communication.
Note
The 2103Ci only works in a CDMA cellular service area with
1xRTT. See your local CDMA service provider for availability.
As you face the unit, the 2103Ci antenna connector socket is
located on the right hand side of the module (Figure 2-4). Remove
the connector cap from the socket and attach it to the cap on the
end of the antenna cable. To connect the antenna, press down on
the silver metal latch on the side of the module and push the
antenna’s connector into the socket.
Figure 2-4 Antenna connector (left) and antenna connected to 2103Ci (right)