3
58-723-004 Rev A01
Chapter 2 – System Installation
Note: Carefully review the Precautions section in the previous chapter before performing
any of the procedures outlined in this chapter. Again, use only a Kinetix PCI Express data
cable and Kinetix PCI Express interface card with the camera. Using a different cable or
interface card may result in unexpected errors or permanent damage to the system.
Introduction
The Kinetix camera system includes the following hardware components:
•
Kinetix Scientific CMOS Camera
•
USB 3.2 A to C data cable, 1 m
•
USB 3.2 C to C data cable, 3 m
•
A 12V/10A DC power supply with international power cord set
•
I/O to 8 BNC trigger breakout cable, part number CBL-IO-8-BNC
•
USB memory device containing PVCAM library and drivers
•
Quick Installation Guide
•
PCI Express (PCIe) interface card
•
PCI Express data cables (two identical cables)
•
USB 3.2 10 Gbps interface card
•
C-mount front plate
•
F-mount front plate
•
T-mount front plate
Kinetix system components are linked by
two PCI Express data cables or a USB 3.2 data
cable and
controlled by the host computer system. These hardware components should be
included with the shipment. Keep all the original packing materials so you can safely ship
the camera to another location or return it for service.
If you have any difficulty with any step of the instructions, contact
Teledyne
Photometrics
Customer Service.
Summary of Contents for KINETIX
