TELEDYNE OLDHAM SIMTRONICS Everywhereyoulook GD10-P00, Operating Manual

Page: 23 / 60

GD10P00 and GD10PE
INFRARED POINT GAS DETECTOR
OPERATING MANUAL
850-811250
Revision 13b
17
4.5 GD10PE Fixing
The detector should be mounted so that the longitudinal axis of the detector is horizontal. This will
prevent accumulation of water and dust on the optics.
4.6 GD10PE Weather protection/standalone mounting
Figure 5
4.7 GD10PE Duct or pipe mounting
By using the optional duct mounting kit, GD10PE is very suitable for monitoring ventilation air in
ducts and channels. The flange is bolted to a vertical, flat surface of sufficient strength. The
detector is supported by the flange only, no other fixture of the “nose” is necessary. If necessary,
a flat support plate may be welded to the duct wall if the wall itself is not suitable (too weak or
curved).
Always mount Deflector Ring when using
Weather Protection
Bracket Support needed for
standalone mounting