TELEDYNE OLDHAM SIMTRONICS Everywhereyoulook GD10-P00, Operating Manual

Page: 20 / 60

GD10-P00 and GD10-PE0
INFRARED POINT GAS DETECTOR
OPERATING MANUAL
14 850-811250
Revision 13b
4.2 GD10P Fixing
The detector is mounted by means of a projecting mounting leg using two M8 screws and
washers, or by means of the Duct Mounting Flange Kit (4 x M8 screws). The detector should
preferably be mounted so that the longitudinal axis of the detector is horizontal. This will prevent
accumulation of water and dust on the optics. The Weather Protection must always be oriented
correctly for optimal performance.
Figure 1: GD10P mounting
4.3 GD10P Weather Protection
When the GD10P is mounted outdoors, the flow direction indicator must point
upwards
See “Flow Direction Indicator” in Figure 2 below. Orientation of the Weather Protection is
performed as follows:
•
Use a screwdriver to loosen the two screws on the Weather Protection
•
Rotate the Weather Protection to correct position
•
Tighten the screw with a torque of max. 0.5 Nm
M8 screw
Weather Protection