Operator’s Manual
5
Do not overload. Do not apply any potential to the probe leads that exceeds
the maximum rating of the probe. Always comply with the Voltage vs.
Frequency Derating Curve.
Observe all terminal ratings. Observe all markings on the oscilloscope
before connecting. Consult the oscilloscope product manual for further
ratings information.
Do not remove probe casing. Touching exposed connections may result in
electric shock.
Use indoors only within operational environment listed. Do not use in wet or
explosive atmospheres. Keep product surfaces clean and dry.
Handle with care. Probe tips are extremely sharp and may puncture skin or
cause other bodily injury if not handled properly.
Keep fingers behind the finger guard of probe body and accessories.
Do not operate with suspected failures. Before each use, inspect the probe
and accessories for any potential damage such as tears or other defects in
the probe body, cable jacket, accessories, etc. If any part is damaged, cease
operation immediately and sequester the probe from inadvertent use.
Cleaning
•
Clean only the exterior of the probe, cables, and accessories. Use a
soft cotton cloth moistened with a mild detergent and water solution.
Do not allow any portion of the probe to be submerged at any time.
•
Dry the probe and accessory thoroughly before attempting to make
any voltage measurement.
•
Do not subject the probe to solvents or solvent fumes as these can
cause deterioration of the probe body, cables, and accessories.
