User Manual
7
Calibration Interval
The recommended calibration interval is one year.
Troubleshooting
Before returning a product as defective, do the following:
•
Verify that the Teledyne LeCroy oscilloscope is running firmware v.
8.3.0.7 or higher. To verify the firmware version of your oscilloscope,
choose Utilities > Utilities Setup from the menu bar, then touch the
Status tab.
•
Check that the power connector is plugged in and locked, and that the
2.92mm cable is connected.
Service
Defective products must be returned to a Teledyne LeCroy service facility for
diagnosis and repair or replacement. Defective products under warranty will be
repaired or replaced.
For a complete list of offices by country, including our sales & distribution
partners, visit: teledynelecroy.com/support/contact
Teledyne LeCroy
700 Chestnut Ridge Road
Chestnut Ridge, NY, 10977, USA
teledynelecroy.com
US Service and Support:
Ph: 800-553-2769 / 845-425-2000
FAX: 845-578-5985
