3
Computer System Requirements
Supported Systems
•
Operating System: Windows 10
•
USB: USB 2.0 and later
Minimum Requirements
•
Processor: Core i5 at 2.7 GHz
•
RAM: 4 GB
•
Free Hard Disk Space on C: drive: 20 GB
Install Software
From Download: Download the latest Wireless Protocol
Suite installer from FTE.com. http://fte.com/x500-soft.
Once downloaded, double-click the installer and follow
the directions. When the installation is complete pin the
Wireless Protocol Suite icon to your taskbar.
Set Up Hardware
1. Connect Cables
Power Connector:
Connect the 15V Power adapter included with the product to the X500 hardware.
Connect to Host PC:
Connect one end of the USB C-C 3.0 cable to the “Host” port on the X500 and connect another end
to the 3.0 port on the host computer. This will allow sending data from the hardware to the PC for the analysis.
Frontline X500 Rear Panel Controls
2. Attach Antennas
Remove the Frontline X500 hardware from the box and attach the six antennas to the SMA connectors on the front panel.
As their names indicate, BT Rx1 and BT Rx2 (disabled) are Bluetooth antenna connectors. Wi-Fi Rx1, 2, 3, and 4 are Wi-Fi
antenna to capture Wi-Fi 5 and Wi-Fi Rx 2 and 3 capture Wi-Fi 6/6E. The base of the antennas can be carefully rotated by
90 degrees so that the antenna points upward.
Frontline X500 Front Panel Controls and Indicators
4
Summary of Contents for Everywhereyoulook Frontline X500
Page 8: ......
