Operator’s Manual
923064-00 Rev A
7
Electrical Ratings
Maximum Input Voltage
1000 V rms (1400 V DC + peak AC)
Installation (Overvoltage) Category
III
Pollution Degree
2
Measurement Category III (CAT III) is applicable for measurements performed in the building installation.
Pollution Degree 2 is applicable to an operating environment where normally only dry non-conductive pollution
occurs. Occasionally a temporary conductivity caused by condensation must be expected.
General Characteristics
Operating Temperature
-10º C to 40º
C
Storage Temperature
-30º C to 70º
C
Altitude, Operating
up to 2000 m (6560 ft)
Cable Length
1.3 m
Weight (probe only
)
42 g
Power requirement
Four internal 1.5 V AA size batteries or
6 V d.c. / 60 mA mains adaptor
(Not supplied )
Dimensions
6.6" (168 mm) x 2.4" (62 mm) x 0.79" (20 mm)
(excluding casing )
Cables
BNC, 95 cm ( RG58 / U ), Input Lines: 45 cm
(PVC, double insulation )
Accessories
2 x Safety Hooks, 4 mm compatible (1 red, 1 black)
Weight
9.35 oz ( 285 g ) excluding batteries
and casing
Safety Certification
EN61010-1:2010 ; EN61010-031/A1:2008
1000V CAT III Approval
www.
.com
1.800.561.8187