I SERIES V oIP USER GUIDE
www.teledexeurope.com
25
Server:
Enter the IP address of the SNTP time
server.
Time Zone:
Select the correct time zone from the
list in the box.
Time Out:
The longest response time for SNTP
server.
12 Hours Format:
Select the 12 hours format.
SNTP:
Select the SNTP server.
Daylight:
Whether Daylight Saving Time is being
used.
Manual Configuration:
Set up the date and time
here instead of using a time server.
3.8.5 MMI CONFIGURATION
Set the greeting information on the LCD display
through the Man-Machine-Interface (MMI).
3.8.6 LOGOUT AND REBOOT SYSTEM
Logout:
Logout the Web entry.
Reboot Phone:
Logout and reboot the phone.
Whenever a user modifies a configuration parameter
of the phone that will take effect after the phone is
rebooted, the user enters into this screen and clicks
“Reboot”. The phone reboots automatically.
Note:
About rebooting an IP phone: some settings
require a reboot in order for the new settings to
work. Always save the configuration before the
reboot, otherwise the settings will return to the
previous settings.
4. Operating Method
for Dialing
4.1 How to Dial an IP Phone
You can make a call after your phone is properly
set up. Please confirm whether all the network
wires are connected correctly, and the phone
credentials have been added (under VOIP section)
to register successfully to the IP/PBX server.
To make a call, dial the number and then press
“#”.
You can find the phone’s IP address by dialing
* * 4(I) 7(P) #.
Input the IP address of the I Series phone in the
browser, press the Enter key, and then you can
visit the settings layout of the I Series phone.
The administrator’s account is admin/admin; the
common user account is guest/guest.
4.2 Set Up the Phone to
Register to a SIP Server
4.2.1 SET THE WAN INTERFACE
Here are the connection ways of entering the
Network -> WAN Configuration layout in the
phone’s net port:
The I Series phone can be connected to the
Internet by using the static IP, DHCP IP, or PPPoE
dialing.
