background image

service may be required. But if advance notice isn't practical, the telephone company 

will notify the customer as soon as possible. Also, you will be advised of your right to 

file a complaint with the FCC if you believe it is necessary. 

4.  The telephone company may make changes in its facilities, equipment, operations or 

procedures that could affect the operation of the equipment. If this happens the 

telephone company will provide advance notice in order for you to make necessary 

modifications to maintain uninterrupted service. 

5.  If trouble is experienced with this equipment [US: 2N3W411BCETIS201], for repair or 

warranty information, Service can be facilitated through our office at: 

U.S. Agent Company name: CETIS, INC. 

Address: 5025 GALLEY ROAD, COLORADO SPRINGS, CO 80915, USA 

Tel: 001-719 638 8821-888 

Fax: 001-719 638 8815 

If the equipment is causing harm to the telephone network, the telephone company 

may request that you disconnect the equipment until the problem is resolved. 

6.  Please follow instructions for repairing if any (e.g. battery replacement section); 

otherwise do not alternate or repair any parts of device except specified.   

7.  Connection to party line service is subject to state tariffs. Contact the state public utility 

commission, public service commission or corporation commission for information. 

8.  If your home has specially wired alarm equipment connected to the telephone line, 

ensure the installation of this [W4] does not disable your alarm equipment. If you have 

questions about what will disable alarm equipment, consult your telephone company 

or a qualified installer. 

9.  If the telephone company requests information on what equipment is connected to 

their lines, inform them of: 

a)  The ringer equivalence number [1.1B] 

b)  The USOC jack required [RJ11C] 

c) Facility 

Interface 

Codes (“FIC”) [02LS2] 

d)  Service Order Codes (“SOC”) [9.0Y] 

e)  The FCC Registration Number [US: 2N3W411BCETIS201] 

10. The REN is used to determine the number of devices that may be connected to a 

telephone line. Excessive 1.1B on a telephone line may result in the devices not 

ringing in response to an incoming call. In most but not all areas, the sum of 1.1B 

should not exceed five (5.0). To be certain of the number of devices that may be 

connected to a line, as determined by the total 1.1B, contact the local telephone 

company. The REN for this product is part of the product identifier that has the format 

US:AAAEQ##TXXXX. The digits represented by ##

 are the REN without a decimal point. 

For this product the FCC Registration number is [US: 2N3W411BCETIS201]indicates 

the REN would be 1.1B. 

11. If this product is equipped with a corded or cordless handset, it is hearing aid 

compatible. 

 

 

 

Summary of Contents for E103-DCX











Reviews: