Telect ELF-0005-0001 User Manual Download Page 44

Page: 44 / 48

1.509.926.6000 :: telect.com

ELF System

Copper / Fiber

:: ELF Family

Chapter 6: Service

CAUTION

CAUTION! Only qualified technicians may install and maintain this product.

6.1 Owner Maintenance

Telect’s ELF chassis, enclosures, and modules do not need preventive maintenance

6.2 Service

Contact Technical Support (USA):

By e-mail: [email protected]

By phone: 888-821-4856 or 509-921-6161

6.2.1 In-Warranty Service

Contact your Telect equipment distributor, or call a Telect Customer Service Representative:

1-509-926-6000

Telect will repair or replace defective products within the limits of the warranty. See “Repacking for Shipment” in

this section.

Call a Customer Service Representative for a Return Material Authorization (RMA) before returning any equipment.

6.2.2 Out-Of-Warranty Service

The procedure for out-of-warranty service is the same as for in-warranty service, except that Telect charges a

processing fee, and you must submit a Purchase Order along with a Return Material Authorization (RMA) before

returning equipment. Call a Customer Service Representative for help getting these forms.

The processing fee guarantees a repair estimate and is credited against actual material and labor costs.

6.3 Repacking For Shipment

Tag the equipment showing owner’s name, address, and telephone number, together with a detailed

description of the problem.

2. Use the original shipping container if possible. If you do not have it, package the equipment in a way to

prevent shipping damage. Include the RMA inside the container and legibly print the RMA number on the

outside of the package, near the shipping address

3. Insure the package.

Summary of Contents for ELF-0005-0001













































Search results

Summary of Contents for ELF-0005-0001

Reviews:

Brands by name

Popular brands

Telect ELF-0005-0001, User Manual

Search results

Summary of Contents for ELF-0005-0001

Reviews:

Brands by name

Popular brands