manualshive.com logo in svg

Telect ELF-0005-0001, User Manual

Share
Download
Telect ELF-0005-0001 User Manual Download Page 36

© Telect, Inc.,  All Rights Reserved, 124317-10 A0

1.509.926.6000  ::  telect.com

33

ELF System

Copper / Fiber

  :: ELF Family

Chapter 4: ELF Fiber Modules

Telect manufactures two Fiber ELF platforms for patching, and patching with splicing:

• 

ELF Fiber Patch (Models ELF-PC12-SC00, ELF-PC12-FC00, ELF-PC12-SA00, and ELF-PC24-LC00)

• 

ELF Fiber Splice/Patch (Models ELF-SP12-SCPT, ELF-SP12-FCPT, and ELF-SP12-SAPT)

All modules are available with either 12, SC/UPC, FC/UPC, SC/APC, or 24 LC/APC adapters. All modules fit the 

ELF chassis and lockable wall-mount enclosure. Mounting screws for installing on the chassis or enclosure are 

included. Telect supplies dust covers for all open fiber adapters.

4.1 ELF Fiber Patch Modules (Model Series ELF-PC12-XX00)

The following illustration shows an ELF-PC12-SC00.

Circuit Designation

Label

0.90 (22.9)

7.21

(183.1)

5.24 (133.0)

1.63

(41.3)

0.87

(22.0)

Note: Dimensions are in in. (mm)

Top View

Clamshell Guide

for Fiber Jumpers

Fiber Patch Adapters

12-Termination

ELF Fiber Patch Module

5.90 (150.0)

Figure 29 - ELF-PC12-SC00

You can purchase Fiber Patch Modules with factory-installed 2-mm fiber jumpers, as shown below

Summary of Contents for ELF-0005-0001

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands