13
tighten the cables.
4.
Connect cables to the control circuit of crane according to the
receiver’s wiring table and control contacts diagram.
Note: Inspect and make sure that all wires are connected
correctly.
5.
Secure the cable between the receiver and crane so that cable
cover (wrapper) will not wear out due to the vibration of the
crane.
2-3-3 Receiver wiring diagram
2-4 Receiver power transformer voltage selection and conversion
F21-E2 receiver provides with 5 kinds of Transformer (24V/48 VAC
、
48/110 VAC
、
48/220 VAC
、
110V/220 VAC
、
220V/380 VAC) that
allows user to choose based on the power input on site and the
designated voltage will be set when the receiver is made in factory.
