VoiceSoft
Phone Recording System User’s Manual
12
Pic 3.2.2-12
The Fourth chapter: Function Setting and index
4.1 About login system.
Default user name and password: admin.
In system default status , if not login the system and it can not to do any operations.
4.2 How to rejigger the storage place of recording file.
After finish install the recording system well, system default the recording file storage
place in disk C In normally, disk C is the windows system disk, and it is not good for to
advice disk C as the recording file storage disk.So how to rejigger the route of recording
file storage.
Open ”Parameter Setting” —>”Recording Option” —>”Storage place”rejigger the recording storage place.
Rules of recording file storage: It can set 4 disks to store the recording file at mostly,
When the “Catalog-“ memory store fully, it will auto switch to “Catalog two” and go on
storing.So analogy.When all the working disk of setting store fully, the system will clean
out the recording data of earliest so that the system can continue to working always.
The system will build up one folder to store the recording file each month.At the months
folder , it will build up one folder to store everday.For example 20050809 stands for the
recording file of Aug.09
th
, 2008 in this folder.
4.3 How to rejigger the system login password.
The system default login password is :admin, about how to rejigger this password is:
Open”Parameter Setting” —>”Password Option” —>”Operator password table” —>”Rejigger user password”.
4.4 If only recording the “out-going“ call, the “Dial-in“ call will no need recoding,
about this setting is:
Open”Recording Setting” —>’Recording “table, and choose “pull out”
4.5 About how to set the extension function.
Please refer to 5.3.5 chapter.
4.6 About how to inquire the recording.
Please refer to 5.4 chapter.
4.7 About how to startup the popup function.
Using this function it need to apply for the Caller ID (FSK/DTMF)
A-
Open “Parameter Setting” —>”Extension Option” —>”Open IP interface “.Remark
B-Then add “ IP address of extension PC”, if gets the IP of PC automatically, then
