25
www.behnke-online.com
Instructions Video 2-wire transmitter and receiver
GB
Introduction
1.4. Safety Regulations
The video transmitter and receiver TRP101 with
two-wire technology comply to all the relevant
rules and provisions regarding electric safety,
electromagnetic compatibility, and all general
requirements applicable at the time of product
launch.
Notes on User Safety
▸
When connecting the device to the power
supply, please follow the information specified
on the labels (cf. “Operation Properties” )
▸
Only conduct work on the video transmitter
and receiver with two-wire technology in a
powerless state
▸
Cables showing wear and tear and old cables
put the users of the devices at great risk. Do
not use old cables or cables showing wear
and tear!
▸
Please leave the installation of the video
transmitter and receiver with two-wire tech-
nology (and the entire system they are part
of) to trained specialists
▸
Do not use the device in the presence of
inflammable substances
▸
Make sure that the transmitter and receiver
are securely fastened
▸
Please consult authorized professionals for
technical service
1.5. Operation Properties
Both the video transmitter and the receiver bear
labels complying to CE labelling.
Refer to the first label for the following infor-
mation:
▸
Model Identification Code (Barcode
Extended 3/9)
▸
Tension (Volt)
▸
Power drain (Watt)
The second label bears the model serial number
(Barcode Extended 3/9).
Please do not use any other than the Behnke
power supply unit provided in the box. Using
unsuitable power supply units may prove
hazardous for personnel and device safety.
