49
www.behnke-online.com
GB
Behnke IP camera
Introduction
1.6. Connecting the IP camera (20-/21-/50-2907-IP, 43-9587, 50-1207-IP/-1204-IP)
LAN connection
Usually, an RJ-45 connector is used to establish
LAN connection ( ). When operated with the
series 20 IP (20-0001A-IP/-0002A-IP/-0005-IP/
-0013A-IP/-0014A-IP/-0016A-IP/-0041A-IP/
-0043A-IP) basic electronics, the network con-
nection can also be established via the series
20 IP basic electronics. To do so, connect the
camera module's RJ-45 socket to the Series 20
basic electronics's socket marked „Port2“ using
a .patch cable. The SIP door intercom needs to
be supplied via a PeO Class 0.
Power supply
Power for the Behnke IP camera is supplied via
the Ethernet port (PoE class 0). When operated
with the series 20 IP (20-0001A-IP/
-0002A-IP/-0005-IP/-0013A-IP/-0014A-IP/
-0016A-IP/-0041A-IP/-0043A-IP) basic
electronics, power for the camera is supplied
via PoE from the IP basic electronics (please cf.
“Connecting the LAN”).
Output
IP basic electronics
Camera module,
rear view
Network cable (including PoE to camera)
Input
LAN
Please note:
The corresponding norms and
regulations for network technology apply.
