background image

Information

Congratulations on your purchase! VOYAGER Digimatic SM 65/85 is among the most
technologically advanced products in the field of satellite TV reception. This handbook has
been prepared to provide information on how to install, use, maintain and technical specifications
your VOYAGER Digimatic SM 65/85.

For additional information, please contact your local dealer or directly the manufacturers:

TELECO s.p.a.

Via E. Majorana 49
48022 LUGO (RA)

Web site: www.telecogroup.com

Technical attendance: 899.899.856

TELECO .p.a. declines all responsibility for any errors contained in this manual. All the
contained information are up to the dates of printing and of the above-mentioned software
revisions. TELECO .p.a. reserves the right to introduce any modification made necessary by
the development of its products.

TELECO WARRANTY

Teleco guarantees its satellite dishes and terrestrial antennas against any
material and/or construction fault and defect. The warranty offered by TELECO
is limited to the free-of-charge replacement or repairing of any parts that are
deemed faulty by TELECO. The warranty is applicable for a period of 3
YEARS starting from the product purchase date; however, it will only be
considered valid if the Customer is able to produce a written document
(invoice or tax receipt) showing the purchase date.

The following is excluded from the TELECO warranty:

a. Damages caused by incorrect installation and/or use and/or maintenance
b. Damages resulting from product alterations not authorised by Teleco
c. Damages resulting from the use of spare parts different from original

Teleco parts

d. Damages resulting from repairs carried out by personnel not

authorised by Teleco

e. Normal part wear;
f. Expenses incurred for spare parts transport between the Customer's

and the service centre

g. Damages that may occur during transport:

the Customer shall always be responsible for transport risks.

1

Summary of Contents for Voyager Digimatic 50

























Reviews: