2
INDEX
1 Connections, adjustments and control unit warnings
--------------------
page 3
2 TRANSMITTERS
---------------------------------------------------------------------
pages 4 - 5
2.1 Memorization of 7-ch transmitter
2.2 Deletion of 7-ch transmitter
2.3 Remote memorization
2.4 Remote deletion
3 MOTOR CONFIGURATION
-----------------------------------------------------------
pages 5 - 6
4 SENSORS
-------------------------------------------------------------------------------
pages 7 - 9
4.1 WIND sensor
4.2 SNOW condition
4.3 TEMPERATURE sensor
4.4 RAIN sensor
4.5 Modification of the alarm automatic angles
5 FURTHER DETAILS
-----------------------------------------------------------
page 10
5.1 Troubleshooting (what to do IF...)
5.2 Replacing the control unit
6 Technical specifications
-----------------------------------------------------------
page 11
WARNINGS
The product at issue must be installed, commissioned and maintained only by licensed and authorised people, respecting the laws concerning
the automatic covers. All the connections must be rated for a single-phase 230V~ power supply. For the disconnection from the power line, use
an all-pole switch with contacts having a dimension of at least 3,5mm. Only suitable materials for the connections must be used to guarantee
insulation that complies with current standards on the subject of electrical safety. The receiver only carries out movement commands and all safety
devices required by the system must be arranged separately. Before the connection to the power supply make sure that the sensors and motors are
correctly connected. A faulty connection of the motors (polarity inversion) could damage them together with the connected mechanical elements.
PRODUCT DISPOSAL: at the end of this product’s useful life, it must not be disposed of as domestic waste, but must be taken to a collection
centre for waste electrical and electronic equipment. To prevent infiltration of water, wire the product as follows:
The manufacturer, Teleco Automation s.r.l, declares that the type of radio equipment is compliant with Directive 2014/53 / EU. The full text of the EU
compliance declaration is available at the following Internet address: www.telecoautomation.com/ceIn the view of a constant development of their
products, the manufacturer reserves the right for changing technical data and features without prior notice.
INFORMATION TO USERS
under art.
14 of the 2012/19/EU DIRECTIVE OF THE EUROPEAN PARLIAMENT AND COUNCIL of 4 July 2012 on waste electrical and electronic equipment
(WEEE). The crossed bin symbol on the equipment, or its packaging, indicates that the product must be collected separately from other waste
at the end of its useful life and not with mixed urban waste. Please contact your municipality, or local authority, for all information regarding
the waste sorting systems available in the area. The retailer is obliged to collect the old equipment free-of-charge when the customer buys a
new equivalent equipment. This is to encourage correct recycling/disposal. Appropriate waste sorting for the subsequent recycling,reatment and
disposal in an environmentally sound way of the disused equipment avoids negative effects on the environment or human health and favours the
re-use or recycling of the equipment’s materials.
