V006
Pag. 24
oscillator departure from the rate value (9.75 Ghz for the low band, 10.6 Ghz for the high
band).
• This subfunction is used to set the modulator output channel (if installed). The available
values range from channel 21 to channel 69. During testing, channel 21 is present.
• It is used to select the required MENU language. The available options are Italian,
English, French, German.
• This is a special subfunction to allow the receiver to be switched back on (or NOT) to the
selected channel when input voltage is restored after a temporary cutoff. If NO is selected,
the receiver will remain in standby when voltage input is restored.
• This function is only active if the receiver is connected to the Magic Sat Plus control logic
board. This board allows the required type of satellite search to be selected on the Magic
Sat Plus system (either AUTOMATIC or SEQUENTIAL).
• Select to go back to the MAIN MENU.
2)
Programs
• By pressing the
key after having brought the arrow
to indicate MAIN MENU
programs, the following screen display will be obtained:
• Position the arrow
to indicate Video and press the
key to obtain the follow
screen display:
Summary of Contents for Magic Sat 2002A
