Teleco Magic Sat 2002A, Installation Manual

Page: 23 / 44

V006
Pag. 23
• The ON SCREEN DISPLAY is used to display all the satellite receiver functions on the
TV screen.
By pressing the
key, the TV screen will show
• This is the MAIN MENU including all the functions that can be controlled on the receiver.
The arrow is a pointer used to select the function to be modified. Which can be scrolled
vertically from one line to the next using the two remote control keys
. Each of the
MAIN MENU functions is divided into one or more subfunctions that are selected by
placing the arrow at the height of the required function and by pressing the
key.
SUBFUNCTIONS
1) Configuration
Place the screen arrow to indicate the Configuration function using the keys .Then
press the key to obtain screen displaying the following subfunctions which are
factory-preset during testing:
• To modify the subfunction values, place the arrow at the height of the required line
using the keys
then use the keys to select the required value.
• This subfunction is used to change the local oscillator values by + or – 7 Mhz on the
UNIVERSAL LNB used. LNB1 refers to the low band (10.7 - 11.7 Ghz) of the UNIVERSAL
LNB while LNB2 refers to the high band (11.7 - 12.75 Ghz). This variation allows the
receiver local oscillator value to be adjusted to the UNIVERSAL LNB value in case of