14
5. TRANSMITTERS DELETION
5.1 Deleting a single transmitter
Press
P2 four times
and keep it pressed.
The buzzer emits an intermittent sound.
Press
the button
of the transmitter to delete.
Once the deletion is successfully completed,
the buzzer emits a continuous sound.
continuous sound
...
( )
keep it pressed
intermittent sound
P2
button to
delete
5.2 Deleting all the transmitters
Press
P2 five times
and keep it pressed for at
least
10 seconds
.
The buzzer emits an intermittent sound.
Release the button once the sound becomes
continuous.
continuous sound
...
( 10 s )
keep it pressed
intermittent sound
P2
after
10 seconds
Press
3 times P3
button of a
memorized transmitter and keep it
pressed for 2 sec. The buzzer emits a
slow intermittent sound.
Press the button of the transmitter
to delete within 5 sec.
Once the deletion is successfully completed,
the buzzer emits a continuous sound.
< 5 s
...
intermittent sound
continuous
sound
to delete
5.3 Remote deletion of a transmitter
In order to carry the transmitter deletion out it is necessary use the
P2
button of the front
cover, entering the “programming mode” first.
P3
P3 button is
located inside the
transmitter
memorized
WARNING: always check that L7 is flashing before carry the following deletions out!
If no further button is pressed within 10 seconds the control unit exits automatically the programming mode.
Press
P2 five times
and keep it pressed
for at least
5 seconds
.
L7
starts
flashing
.
( 5 s )
keep it pressed
P2
ENTERING THE PROGRAMMING MODE
L7 flashes
...
P2
(STOP)
5x
4x
5x
3x
