13
(CH4)
In case of using
bidirectional transmitters
it’s possible
to receive a feedback about the door status, shown by
means of the transmitter’s LED:
- Red led:
open door
- Blue led:
closed door
- Flashing led:
missing feedback
Warning:
the remaining free buttons of the transmitter
should be memorized using the procedures
4.1
,
4.2
or
4.3
.
4.8 Single channel: door status request (“ASK”)
TRTXI868xx04
TRTXP868x04
DOOR STATUS REQUEST (“ASK”)
ASK
Press
P2
seven times
and keep it pressed.
The buzzer emits a continuous sound.
Press
any button
of
TRTXP
or
CH4
of
TRTXI
.
Once the memorization is successfully completed,
the buzzer emits a fast intermittent sound.
continuous sound
...
( )
keep it pressed
intermittent sound
button to
memorize
4.7 Alarm function: shock sensor memorization
The wireless shock sensor (optional) detects any
attempt of breaking or entering and send a signal
to the control unit that will activate the speaker
(optional) for 1 minute. L6 flashes. It is possible
to set the sensor sensitivity by means of the dip
switches (see at side). Sending any opening or
closing door command will stop the alarm.
Warning:
optional speaker must be connected!
ON
2
1
Press
P2
eight times
and keep it pressed.
The buzzer emits a continuous sound.
Activate the shock sensor
.
Once the memorization is successfully completed,
the buzzer emits a fast intermittent sound.
continuous sound
...
( )
keep it pressed
intermittent sound
DIP1 DIP2 Sensitivity
Off
Off
High
On
Off
Medium
Off
On
Low
On
On
Extra-low
TVSSH868A01
ACTIVATE THE
SHOCK SENSOR
Only for TVSSH868A01
(with BST25S is not
necessary the shock sensor memorization).
The garage door must
be completly close.
8x
7x
P2
P2
