8
50 mm
50 mm
25 mm
DIMENSIONS
antenna
cover
receiver
wall
area for electrical
connection
electrical
cables
embedded electrical box
- Warning
Attention
The subject appliance must be installed only by qualified technical personnel in compliance with
the standards. All connections must be rated for a single-phase power supply of 230V. For the
disconnection from the power line, use an all-pole switch with contact with an opening of at least
3,5mm. Only suitable materials for the connections must be used to guarantee insulation that
complies with current standards on the subject of electrical safety. All the necessary safety devices
are to be seen to separately. In the connection to power line and to outputs follow the indications
of line and neutral. Ground connection must be provided separately.
Technical specifications
- Power supply
230V 50/60Hz +/-10%
- Minimum adjustable load
25 W
- Maximum adjustable load
250 W
- Load type
R,L,C
- Frequency radio part
868.3 MHz
- Modulation
FSK
- Consumption on standby
0.8W
- Cable sections in input and output max 1,5 mm2
- Internal thermic protection with auto-reset.
- Electronic control of the load status.
- Possibility to memorise up to 16 standard transmitters.
In the view of a constant development of their products,
the manufacturer reserves the right for changing technical
data and features without prior notice.
The wires must be fixed by means of an additional fastening nearby the terminals; this fastening has to be done by qualified
technical personnel during the installation phase.
The manufacturer, Teleco Automation s.r.l, declares that the type of radio equipment is compliant with Directive 2014/53/EU.
The full text of the EU compliance declaration is available at the following Internet address: www.telecoautomation.com/ce.
INFORMATION TO USERS
under art. 14 of the 2012/19/EU DIRECTIVE OF THE EUROPEAN PARLIAMENT AND COUNCIL
of 4 July 2012 on waste electrical and electronic equipment (WEEE). The crossed bin symbol on the equipment, or its
packaging, indicates that the product must be collected separately from other waste at the end of its useful life and not
with mixed urban waste. Please contact your municipality, or local authority, for all information regarding the waste sorting
systems available in the area. The retailer is obliged to collect the old equipment free-of-charge when the customer buys
a new equivalent equipment. This is to encourage correct recycling/disposal. Appropriate waste sorting for the subsequent
recycling,reatment and disposal in an environmentally sound way of the disused equipment avoids negative effects on the
environment or human health and favours the re-use or recycling of the equipment’s materials.
Product of Teleco Automation - Italy - www.telecoautomation.com
