5
CH1
CH2
CH3
CH4
CH7
CH1
CH2
CH3
CH4
CH5
CH6
CH7
6- To change the level of light intensity of the 4 push button of the 7-channel transmitter from receiver
This procedure allows to modify the level of brightness set in the first 4 channels of a 7-channel transmitter
through the external mechanical push buttons of the receiver.
The procedure can also be used when a transmitter is memorized in more than one receiver, varying in every
single receiver the value of light (without setting the identifying number in every receiver).
transmitter
transmitter
adjust new light value by mechanical push-button
press the button to modified
press and hold more than 5s
3- Press and hold down the CH7 push button
for 5 sec., during this time the load will turn
off; After 5 sec. the led flash quickly for 5 sec.
and the load will turn on at the new value.
1- Press the push button to be
modified
2- Regulate the new value with
the external mechanical push-
buttons.
6.1- To change the level of light intensity of the 4 push button of the 7-channel transmitter from transmitter
Case 1:
one 7-channel transmitter memorised on one dimmer receiver
2- Hold down the CH7 push button for 5 sec.,
during this time the load will turn off;
- after 5 sec. the led 1 turns on for 5 sec. and
the load will turn on at the new value.
2- Adjust the new value with the
two push buttons Ch5 Ch6;
adjust new light value
1- Press the push button to be
modified
press the button to modified
press and hold more than 5s
transmitter
transmitter
transmitter
