TH-HDMI-KIT
3
Rev.:2/7/12
System Requirements for Setup
Hardware requirements
▪
Most of DVD, Blu-ray or media receiver with HDMI ports are compatible with the extender.
▪
In case of using computers as a graphic source, regardless of OS version, HDMI ports are
required to be embedded.
▪
Only HDMI TVs or monitors are applicable.
▪
Proper initial trial of the entire platform with its application using a short length copper cable
is recommended prior to install with the optical link.
Software requirements
▪
No special needs, but make sure that media contents protected by HDCP should be played
with HDCP certified players and TVs.
AC/DC Power Adapter Technical Advisory
▪
The power of THOR-HE-KIT is designed to supply to both boxes of Tx and Rx by plugging
the external powers.
EDID Emulation Advisory
▪
Before use the product, the Smart- EDID procedure should be done as shown in the
Installation (Step 6)
▪
We strongly recommend you to do Smart- EDID procedure again if you want to change
HDMI display. But, it can be displayed without re-emulation between same resolution TVs.
Connection Advisory
▪
We strongly recommend you to connect HDMI media source directly into HDMI display
output via THOR-HE-KIT without connecting any distributor, switcher, selector etc, which
could make incompatibility.
Installation
Important: Please follow the installation procedure below. Improper or no operation may
result if the start-up sequence is not correctly followed.
Step 1
Carefully unpack the contents in the shipping group.
Step 2
Connect the Transmitter to the HDMI sources (DVD, media receiver) over HDMI cable.
Figure 2 – Connection of HDMI cable between Transmitter box and media receiver
