7
1.6
SWITCHING THE NOVO UNIT ON
Switch the mains supply on and power on the the Novo
by pressing the grey power button on the back of the unit.
You will see the lights on the Novo run through a cycle
and following this the Novo alarm will be ready for use.
(The only light that should be illuminated is the red
“alarm” button.
1.7
SWITCHING THE NOVO UNIT OFF
The Novo alarm uses very little power and in all normal circumstances should be left switched ON.
If it is necessary to switch the unit OFF then please carry out the following:
-
Turn the Novo over and locate the small round power button in the centre of the unit.
-
Press the power button for 1 second and release (you will hear a beep and the Novo will power down).
