TeleAdapt TA-7500L MediaHUB HD, Installation Manual

Page: 7 / 34

TA-7650 and TA-7750 Installation Manual
Last Revision: 9/30/11 11:23 AM
7
Electrical Requirements
A 120-volt, 60Hz, 15-Amp electrical supply is required for the TA-7650. A
standard duplex (2) 120-volt, 60Hz, 15-Amp electrical supply is required for
the TA-7650 plus TA-7500L.
Care and Maintenance
Though TeleAdapt MediaHubs are designed for durability, they still remain
complex electronic devices. As such, care needs to be taken with how they are
handled. The following are tips to care for your system:

If the MediaHub has visible smudges, fingerprints, or other foreign material,
you can clean it by using a soft clean cloth such as a lens or eyeglass
cleaning cloth.

Slightly dampen a corner of the cloth with water and wipe off the unit
housing to loosen any dirt or foreign material. Using a dry portion of the same
cloth, wipe the housing to dry.

Do not use harsh chemicals, cleaning solvents, or strong detergents to
clean the MediaHub.

Your TeleAdapt MediaHub should never be positioned or installed anywhere
where it could get hit, dropped, or banged around.

Do not drop, knock, or shake the device. Rough handling can harm
internal operations.

Your MediaHub should be dry. Liquids or moisture can cause damage to
internal electronic circuits. If your unit gets wet, immediately remove power
allowing the unit to dry before re-applying power.

Do not store the MediaHub in hot areas. High temperatures can shorten the
life of electronic components and warp or melt certain plastics.

Do not attempt to open the MediaHub gaining access to the internal
infrastructure. Please notify TeleAdapt service and support personnel
regarding return materials authorization policy.