TeleAdapt Roomcast
Installation Guide
Pairing Roomcast Remotes
Pairing - Dial
1. Make sure the Roomcast is powered on.
2. If the dial is attached to a base, then remove the base retaining screw to detach the base.
3. The pairing button can be reached with a paperclip inserted in the small pinhole in the base of the Dial.
4. Hold the Dial within 30cm of the Roomcast main unit and depress the pairing button, the LED ring will
fl
ash then stay on when paired.
5. Release the pairing button. The Dial will now be paired with the Roomcast main unit.
6. Re-attach the base if required.
Pairing - Push Button Remote
1. Make sure the Roomcast is powered on.
2. Hold the remote within 30cm of the Roomcast main unit and depress Select and buttons
simultaneously for 5 seconds, the LED should blink rapidly.
3. Release both buttons and the LED should stay on brie
fl
y.
4. Check the remote is working correctly.
Revision 2.1 -
May 2018
26 30
