TeleAdapt Roomcast
Installation Guide
Installation
Before starting the installation make sure you have read and understood the “Important Safety
instructions”.
Step 1
Set the DIP switches. Only SW1 is read by Roomcast.
Step 2
Attach the bracket to the main unit with the 4 M3 screws.
Step 3
Carefully mount bracket and main unit on wall or under the desk using the wood screws provided. You only
need 2 screws to hang the wall mount, however for under-desk use all 4 screws.
Step 4
Locate the power supply using the Velcro adhesive strip.
Step 5
Attach Internet (WAN), TV (HDMI TV) and PSU (12V DC) to the Roomcast.
Revision 2.1 -
May 2018
13 30
SW1 OFF = LED’s disabled
SW1 ON = LED’s enabled
