TeleAdapt DeskPoint Pro User Manual
Version 12.2011
28
When WEP is enabled by a security mode, the
Key
length
can be specified to be
64
Bits
or
128
Bits
.
The
Selected
key
setting specifies the key to be used as a
send-key
for encrypting traffic from the local
device side to the remote device side.
Key Length: select key length 64-bit or 128-bit.
Key Format: Select the Hex (10 characters) or ASCII (5 characters).
Hexadecimal (WEP 64 bits): 10 Hex characters (0~9, a~f).
Hexadecimal (WEP 128 bits): 26 Hex characters (0~9, a~f).
ASCII (WEP 64 bits): 5 ASCII characters (case-sensitive).
ASCII (WEP 128 bits): 13 ASCII characters (case-sensitive).
Key Setting: Enter the key in the key setting field.
In the above security modes, a back-end RADIUS (Remote Authentication Dial-In User Service) server
is needed if IEEE 802.1x functionality is enabled. See Section 4.8.3.5 for more information about IEEE
802.1x and RADIUS.
WPA
Fig 34. WPA settings
Fig 33. WEP settings
Note
: The number of characters if the
Pre-Shares Key setting must be at least 8
and can be up to 63.
