TeleAdapt DeskPoint Pro User Manual
Version 12.2011
26
RTS Threshold
:
Set the RTS Threshold, value can be written between 0 and 2347 bytes.
Beacon Interval
:
The beacon is a periodic packet the DeskPoint Pro sends out on the air to announce
its presence and name (SSID). Beacon Interval represents the amount of time between beacon
transmissions. Set the Beacon Interval, value can be written between 20 and 1024 ms.
Preamble Type
:
Click to select the Long Preamble or Short Preamble support on the wireless data
packet transmission.
RF Output Power
:
To adjust transmission power level.
IAPP
:
Click to enable or disable the IAPP function.
Protection
:
Protect 802.11n user priority.
Aggregation
:
Click to enable or disable the Aggregation function.
Short GI
:
Click to enable or disable the short Guard Intervals function.
Security
IEEE 802.11 security settings include
None
,
WEP
,
WPA
,
WPA2
and
WPA2
Mixed
. The default setting
is
None
(Open System). In a hotel setting a separate authentication system is generally deployed and
the DeskPoint Pro would be configured without any security settings. If there is not a separate
authentication system you should consider the use of WEP, WPA, WPA2 or WPA2 Mixed to prevent any
unauthorized access. In this instance both the guest PC and the DeskPoint Pro must have the same
settings for security.
Note:
When the security mode is set to Open System, no authentication or data encryption will be
performed by the DeskPoint Pro. Also note, that when Multiple AP’s have been configured you
will need to configure the security settings that apply to the Primary SSID and any enabled virtual
SSIDs.
