TELE System
12
3.4.8
PVR Memory information
Technical consultation and configuration menu of the USB storage device when connected to the receiver. Provides
information about space available, as well as:
1.
YELLOW button (
Format
): Utility to format the USB memory to FAT32 format.
WARNING
Formatting the memory will lose all data/files contained in it.
2.
BLU button (
DVR Set
): USB memory configuration for recording and/or Timeshift. Refer to paragraph 2.6.2.1.
3.4.9
Other
3.4.9.1
Channel Play Type
Channel change mode using the C
CH+/C
CH- buttons between: all channels (
All
), only free channels (
Clear
) or only the
encrypted channels (
Encrypted
).
3.4.9.2
Auto Standby
The receiver is equipped with automatic shut-off function for energy saving. After three hours in operating mode without
any action by the user, the receiver will automatically go into standby mode. This function is factory preset and can be
deactivated through the menu item
Auto Standby
(
On
/
Off
).
3.4.9.3
Power Saving in Standby
The receiver is equipped even with a system to save energy during Standby mode. This function is factory preset. Also, it
can be disabled through the menu parameter
Power Saving in Stanby
(
On
/
Off
) in order to keep always active the RF
OUT (the antenna loop).
3.5
Tools menu
3.5.1
Information
Lists system information of the receiver, in particular the software version in use.
3.5.2
Factory Setting (reset)
The original factory restore function of the receiver is commonly called Reset. To reset, go to
Factory Setting
menu,
then confirm by pressing the O
OK button on the screen
Yes
.
WARNING
When you do this, you will lose all user customizations and all channels loaded. The latest software version installed will
be preserved.
3.5.3
Upgrade by USB
The receiver software is upgradeable via USB port from this menu, after inserting a USB stick containing the image
appropriate software that the manufacturer will, at its discretion, provide when necessary.
WARNING
During a software update, do not interact with the receiver and never turn off the mains: there is a risk of permanent
damage to the receiver!
3.5.4
Remove USB device safely
Utilities for the safe removal of a USB storage device connected to the receiver. Refer to paragraph 2.6.1.2.
