English
TS6206 DT
3
2 Product description and connections
2.1 Front panel
1.
SIGNAL
LED indicator of antenna signal presence.
2.
STANDBY
LED indicator of Standby status.
3.
IR
Infrared sensor for remote control.
4.
CNANNEL
Previous channel button.
5.
CHANNEL
Next channel button.
6.
ON / Stand-by button.
2.2 Back panel and connections
CAUTION
x
It is good practice to connect the receiver with other appliances (e.g. TV, VCR, HI-FI, etc.) and the antenna before
plugging in the mains lead. When the receiver is powered electrical voltage differences may be created when
plugging in the jacks, which may generate currents that could damage the appliances.
x
The direct TV SCART connection should always be used as a first operating test, since other more complex
connection sequences may give malfunctions that are not caused by faults or defects of the actual appliances but by
problems of incompatibility.
1.
RF IN
Antenna input.
2.
TO TV - LOOP OUT
Antenna TV loop through output.
3.
TV SCART
TV SCART connection
4.
VCR SCART
Video recorder SCART connection
5.
SPDIF - COAXIAL
Digital Audio output for home-theatre amplifier.
6.
RS232
serial port RS232
7.
AC
Mains lead for
230 Volt AC, 50Hz
