7
3
Connections
3.1
Antenna connections/cable TV channel
To view the television channels, you can connect the TV to one of the following
devices:
A terrestrial antenna and/or a satellite antenna system.
In either case, connect the antenna cable (75
Ω
) to the coaxial jacks located in
the rear of the TV.
3.2
Connection to an external device
Via SCART: make sure that both the TV and the device are turned off. Connect
the SCART cable from the source to the TV. Turn on the two devices.
Press the Source button on the remote control and select SCART.
Via RCA: make sure that both the TV and the device are turned off. It is
necessary to use an RCA/Jack3.5mm adapter to connect the device to the
AV/RCA input. Turn the two devices on. Press the Source button on the remote
control and select AV as the source.
Via YPbPr (Component): make sure that both the TV and the device are
turned off. It is necessary to use an RCA/3.5mm jack adapter to connect the
device to the AV/RCA, respecting the colors as per the following instructions:
Yellow - Green
Red - Red
White - Blue
Turn on the two devices.
Press the Source button on the remote control and select YPbPr.
Via HDMI: make sure that both the TV and the device are turned off. Connect
the cable from the source to the TV. Turn on the two devices.
Press the Source button on the remote control and select HDMI.
