15
a professional installer for advice. The power and signal quality indicators refer
to the first transponder of the chosen satellite list.
Changing the
DiSEqC 1.0 / 1.1
parameters,
DiSEqC 1.2 / DiSEqC 1.3
, you will get
three different configuration modes.
8.1
Simple installation
For the single inverter antenna (LNB)/satellite with direct connection between
the TV and antenna, they DiSEqC commands or other special communication
protocols are not used.
8.1.1
Antenna and satellite configuration
From the Antenna setup menu make the following choices:
1.
Satellite
: Satellite choice of interest. Highlight the Satellite confirm by
pressing OK and press
►
.
1.
LNB type
: Type of converter (Low Noise Block converter - LNB) associated
to the chosen satellite. For common satellite systems used in Italy, The
Universal (9750/10600)
is used.
2.
LNB power
: LNB power supply for switching between horizontal and
vertical polarization. Generally it must be maintained active (13 / 18V). Its
inactivation is rather useful when you realize IF-IF distribution plants (for
Expert users).
3.
22KHz
: 22KHz signal switching between high and low band
2.
Tone burst
: none
3.
DiSEqC 1.0
: none
4.
DiSEqC 1.1
: none
5.
Motore: none
8.1.2
Channel search for satellite
After setting the configuration, to search channels on the chosen satellite press
the BLUE button
Scan
and define the following parameters in the Channel
Search dialogue window:
1.
Scan type
: scanning mode following the transponder database (default
option) or blind-scan frequency steps (Blind-Accurate option) or via
network (network option) that scans the active transponders.
2.
Channel type
: choose
free to air channels
to only search for Free
channels (recommended),
Scramble
only for encrypted channels or
Free+Scramble
to scan both types.
