15 l
EN
6.6.8-Channel List
If you press
OK
button when no menu is
open,
Channel List
menu will be displayed
on the screen.
CHANNEL LİST
Channel 1
Channel 2
Channel 3
Channel 4
Select
Exit
You can see all the channels of the current
mode while you are in the
Channel List
menu, you can select the desired channel
with
Up/Down
buttons and view it by
pressing the
OK
button.
6.7-Signal Information
This menu gives information about Channel,
Network, Modulation, Signal level and quality.
Press
MENU
button to enter this menu.
Select
Channel Setup
menu by pressing
the
Right/Left
navigation buttons. Select
Signal Information
tab by pressing the
Down
navigation button and confirm with
Right
navigation button or
OK
button. Signal
Information menu will be displayed.
6.8-CA Module (Conditional
Access)
In this menu, you can check the CA Module
settings that you can attach to your television.
If a CI module is inserted for a channel that is
encrypted, then a submenu for that module is
opened and the information for that module is
updated.
6.9-Active Antenna Power
(optional)
When this feature is set to On, you can feed
an external antenna you will connect to your
television by the tuner of your television
without needing any external source. Scroll to
the
Active Antenna Power
tab by pressing
the
down
navigation button in the
Channel
Setup
menu and select
On
by pressing the
Right/Left
navigation buttons.
Signal Information
Channel
23
490 Mhz
Exit
Network
XX Network
Modulation
2X 64XXX X2/3
Quality
60%
Signal Strength 90%
Back
Note:
Signal Information menu will be active
only for Digital broadcasts.
Summary of Contents for PALCO19/L04
Page 1: ......
