9 l
EN
6
Performing the initial power-on settings
6.1-TV controls
6.1.1-Temporary on/off (STAND-BY)
When you press the red
POWER
button located on your remote control
while your television is switched on,
the sound and the picture will go off.
In the stand-by mode, the power
indicator of your television will glow
brighter. To switch your television
back on, either press any numeric button or
P+ / P-
buttons.
Caution! If you are not going to use your
television for a long time, unplug its
power cable from the socket or turn it off
with on/off button.
6.1.2-Digital TV, Analogue TV and AV
Mode selection
Press the
Change Source
button on your
remote control.
INPUT SOURCE
menu will
be displayed. Select
DTV
(Digital TV),
ATV
(Analogue TV) or desired
AV
mode from
the Source menu with
up/down
navigation
buttons and confirm with
OK
button so that
your television will switch to the source you
have selected.
6.1.3-Channel Selection
You may select program number you would
like by pressing the
P+/P-
buttons on your
television and on your remote control. To
select the programs that are above 9, you
can use the Numerical buttons. You may
enter the number of the program you would
like to select using the numerical buttons. For
example, to switch to the program number
12, press respectively the numeric buttons
1 and 2 on your remote control. You can
perform the program selection also from the
Program Table and Channel List menus.
6.1.4-Temporary sound mute (MUTE)
To temporarily mute the sound of
your television, press the
MUTE
button on your remote control. In that
case,
MUTE
symbol will appear on
the screen. When you press the same
button a second time, the sound
will be restored. If you press the
V+
button
while in the Mute mode, the sound level is
increased and the Mute function is aborted.
6.1.5-Returning to the Last Viewed
Program (SWAP)
Allows you to switch between the
current program you are watching
and the source, or the last selected
program and the source. For example, if you
change the channel to Program 11 while
you were watching Program 1, press
SWAP
button to switch back to Program 1. Press
SWAP
button to switch back to Program 11
again.
6.1.6-Main Menu
Press the
M
button. The Menu including all
the setting menus will appear on the screen.
Navigate through the Menu titles with the
Right/Left
navigation buttons and press the
OK
button to select the desired menu. If you
want to exit the menu in any step, just press
the
M
button. Press
o
button to return to the
previous Menu while you are in a sub menu.
POWER
MUTE
Summary of Contents for PALCO19/L04
Page 1: ......
