Tele Radio Tiger Shark, Manual And Installation Instructions

Page: 16 / 60

TigerShark
boat lift solutions
16
Connection of limit switch to control panel
Below, you’ll see how the connections should be drawn from the micro-breakers’
poles to the connection console in the control panel.
C
B
A
A
N N L1 L2 1 R
1
B
1
O
1
R
2
B
2
O
2
2 3 N
A
A
C
C
B
A
B
BLACK
RED
BLUE
WARNING!
It is very important
that this phase of the installation is
carefully thought out and performed
with precision. If the micro- breakers
are connected incorrectly, thus disabling
them, the hoist will NOT stop at the au-
tomatic stop positions, leading to serious
equipment damage as a result. For this
reason, test the hoist equipment without
the automatic hoisting features before
installation. See “Raising/lowering the
boat outside of the boat hoist’s stopping
positions.” for information on how to do
this.
WARNING
Moving parts can crush.
Exposed mechanical
parts of boat lift equip.
Stay away from boat
lift when operating.
Connection box in control panel
TIP: If the boat hoist does not stop at
the end position, you can remedy this
by switching conductors 2(B) and 3(C)
in the connection box. This will reverse
the breaker handles’ functionality.