Tele Radio Tiger Shark, Manual And Installation Instructions

Page: 15 / 60

15
Adjusting the limit switch (lowering)
In order for the limit switch to work properly, it needs to be adjusted upon
installation. This is done in two steps, first when the boat hoist is in the top
position, and then when it is in the bottom position - this is when the breaker
handles are adjusted.
When the hoist is in the desired bottom position, turn the screw that corresponds
to the handle/breaker you selected to regulate the lowering function. Turn the
screw until the breaker handle activates the micro-breaker with a click.
When the breaker handle reaches this position during lowering, the micro-breaker
will cut the power to the relay that controls the lowering function.
Adjust the boat hoist or the hoisting engines to the position that corresponds
to the hoist’s bottom position. That is, to the lowest position you want to be
controlled by “AUTORUN.”
NOTE! In this example, the lower breaker has been chosen to control the lowering relay. This
may vary by installation. Depending on how the position indicator is attached, the meaning of
the breakers may be reversed. For this reason, take the necessary precautions during installa-
tion and testing to prevent damage to people or property.
NOTE! This function must be checked carefully to avoid incorrect boat hoist operation.