FUNCTION LEDS INDICATION
LED Colour Off On Indicates
7
red
x
Not compliant with PLd.
x
Compliant with PLd.
8
red
x
No transmitter is registered.
x
Flashes once: One or more transmitters are registered. No radio trans-
mission established.
x
Double flash: One or more transmitters are registered and logged in. No
radio transmission established.
x
Radio transmission established.
9
yellow
x
Receiving a radio packet from a transmitter other than a Panther.
9
10
yellow
green
x
Receiving a radio packet from a transmitter set to the radio mode different
from that of a receiver.
9
11
yellow
orange
x
Receiving a radio packet from a transmitter that is not registered.
10
green
x
Receiving a radio packet, low signal (RSSI).
11
orange
x
Receiving a radio packet, configuration ID not accepted.
10
11
green
orange
x
Receiving a radio packet, custom ID not accepted.
9
10
11
yellow
green
orange
x
1. Receiving a radio packet from a registered transmitter. The receiver is
already controlled by another registered transmitter. NOTE! "Radio link"
must be activated in the receiver.
2. Load select mode is activated. Incorrect Load is selected on the
transmitter.
ERROR CODES
If an error occurs that requires the attention of Tele Radio AB, all Function LEDs will flash. At the same
time, one or more Relay LEDs will light up. Note the Relay LEDs that light up and contact your
representative for assistance.
-
10
-
