6.4 FCC/IC label placement
The FCC/ IC label is placed on the radio module. The radio module is fitted inside the transmitter.
6.5 Product label on the transmitter
You will find the product label on the outside of the enclosure of the transmitter.
6.6 The radio module
Each radio module is specifically designed to match a Tele Draulic product in terms of physical
dimensions, connection points, voltage levels, signal interface etc. To use the radio modules in
non Tele Draulic products is not permitted. The radio modules are designed to interface directly to
the main board of the receiver/transmitter unit. They are power supplied by the main board and the
radio circuit operates strictly according to instructions from a microprocessor on the main board.
The radio circuit configuration is stored in a flash memory on the radio module. A receiv-
er/transmitter unit with a defective/no radio module will give an error message immediately after
power up, and it will not be possible to start a radio session.
21
