Note:
Always hold the transmitter with the control panel towards you. The user must be able to
read any text on the control panel and understand the symbols on it.
Note:
Transmitters not in use it must be switched off and stored in a secured storage space.
5.1 Start-up procedure
Before operating the Hydra system the following procedure must be followed.
1. Make sure that all safety measures have been followed.
2. Make sure the transmitter battery is charged.
3. Make sure that the emergency stop button is pushed in.
4. Turn the key switch to ON position (horizontal).
5. Twist and release the emergency stop button.
Initial start-up logo displays.
Battery LED indicators lights.
Note:
The display shows "Session selection". Should the display show a warning on zero
position for control switch or joystick, release affected controls if necessary to proceed.
6. Press the two start buttons simultaneously. Keep pressed for a second.
7. Release both buttons.
The transmitter logs in to the receiver in which it is registered.
The middle LED flashes quickly while waiting for the receiver confirmation.
When successful the middle LED lights with a firm light.
Note:
If the paired receiver is not detected within 30s, login process will be cancelled and
the transmitter will automatically turn OFF.
8. Make sure that the machine functions correspond to the transmitter functions.
9. Test emergency stop.
Do not use the system if the emergency stop button does not stop the equip-
ment. Doing so may cause serious injury or death.
17
