elmeg IP120 / en / elmegIP120_v1 / starting.fm / 01.08.2012
V
e
rsion 2, 27.0
5
.2010
17
elmeg IP120
Teldat
First steps
Connecting extension modules (optional)
You can increase the number of programmable keys using extension modules (max. two; can
be ordered as accessories
). Each module includes 14 additional programmable
keys. The function keys can be programmed using the Web configurator (
The package contains:
u
One extension module
u
One connection frame with four fastening screws
u
One connection cable
u
Insert strips
§§1§§
Position the extension module to the right of the phone (on left when viewed from below),
so that the module and phone are the same height and meet in the centre.
§§2§§
Insert the clasps on the connection frame into the respective notches on the phone and
module and push the connection frame upwards until it clicks into place. Secure the connec-
tion frame with the screws provided.
§§3§§
Establish the connections using the cable supplied.
Please Note
If the extension module does not work after installation, restart your device (disconnect it from
the mains power supply and reconnect it).
Extension module
1
3
Extension module
elmeg IP120
2
