elmeg IP120 / en / elmegIP120_v1 / web_configurator.fm / 01.08.2012
V
e
rsion 2, 27.0
5
.2010
90
elmeg IP120
Teldat
Configuring phone settings via the Web configurator
Function keys
On this screen you decide on the assignment of the directory key and programme the function
keys.
Settings
¢
Function Keys
Assigning the directory key
You can use the directory key
Z
(navigation key
s
) to open the
local
directory by default
). You can change this setting.
¤
Select which directory you want to access with the
Directory Key
:
–
Local Directory
)
–
LDAP
(corporate directory
Programmable keys
Your elmeg IP120 allows you to assign frequently used functions or phone numbers to up to 7
keys so that you can access them with one key press. You can increase the number of function
keys by connecting extension modules (
All available function keys are shown with the
Phone Number
and
Key setting
.
¤
Click on
Edit
to assign a phone number or function to a
Key
. The window for programming
the selected key will open.
¤
Select the required function from the
Function Select
list.
Line
Assigns a specific connection to the function key. You can use the key to make a call
via this connection or to answer an incoming call for this connection. The key flashes
if a call comes in and lights up if the line is busy.
¤
Select the required connection. All configured connections are displayed for you
to choose from (
Park + Orbit
This function key is used to “park” a call. The participant hears the hold music. This
function key allows you to transfer calls within a group, which share a common line.
It will be configured on all extensions for the group. The "Park + Orbit" keys on all
extensions flash if a call has been "parked" on an extension. The call can be picked
up on any extension by pressing the key.
¤
Enter the
Phone Number
of the shared line that is configured on the phone sys-
tem as identifier.
Please note:
This function is only available if your elmeg IP120 is connected to a
phone system supporting Park + Orbit.
