3.1.1.1 LEDs
The LEDs are located on the front panel of the router as shown in the following image:
Fig. 3:
Front panel LEDs
LED “L” lights up in green while the device is in startup mode. Once the device has started up, the LEDs indicate the
following:
LEDs
LED
Associated Inter-
face
Status
Description
S
Cellular interface
Green
Amber
SK1 operating SIM. This processes traffic through the carrier
for the SIM installed in this tray.
SK2 operating SIM. This processes traffic through the carrier
for the SIM installed in this tray.
C
Cellular interface
Red
Amber
Green
Cellular interface is unavailable, not installed or not registered.
The device has registered in the network and is in the process
of establishing a PPP protocol connection.
The device is registered, the PPP connection has been estab-
lished, and IP traffic can be sent through the PPP interface.
• Steady: Data is not being transferred.
• Blinking: Data is being transferred.
L
Cellular interface
Green
Yellow
Red
Off
Coverage level above -90dBm.
Coverage level between -90dBm and -100dBm.
Coverage level below -100dBm.
Cellular interface is not active.
U
Multi standard seri-
al interface
Green
Yellow
Red
Off
Communications established.
Establishing the link.
Port has been initialized.
Port has not been initialized.
P
PLC interface
Red
Yellow
Green
PRIME PLC interface is not available, not installed or not re-
gistered.
PRIME PLC is running but no SNs are currently detected.
PRIME PLC is running and maintaining a connection to one or
more SNs. PRIME traffic can be sent through the PLC inter-
face.
Teldat S.A.
3 Components and power supply
Regesta PRO PLC
7
