elmeg IP140 / en / elmeg140_v1 / connectivity.fm / 09.04.2014
V
e
rsion 2, 27.0
5
.2010
93
elmeg IP140
bintec elmeg
Connecting a mobile phone or headset
Registering/de-registering the device
To register a device to the elmeg IP140 via DECT, the registration process must be initialised on
the base station and on the DECT device you wish to register.
De-registering the device
q
Select
De-register Device
.
§§OK§§
Press the display key.
§§Yes§§
Confirm the action.
Activating/deactivating Eco Mode
Your elmeg IP140 is equipped with the environmentally friendly Eco Mode+ for DECT operation.
When you activate
Eco Mode+
, the radiation (DECT transmission power) of the phone in idle
status is switched off.
q
Select
Register Device
.
§OK§
Press the display key. A device that starts
the registration process within 60 sec-
onds is registered to the phone.
~
Enter the PIN for the DECT device
to be
registered
.
§OK§
Press the display key.
Please note
Only one device can be registered via DECT at a time. The existing device is de-registered if
you register another device.
If the function is activated,
Eco Mode+
is
highlighted with
³
.
§§Change§§
Press the display key to activate/
deactivate Eco Mode.
If Eco Mode is activated, the DECT icon
¼
appears in green on the idle display of the
phone (
DECT
Back
OK
Activation
Register Device
De-register Device
Eco Mode+
³
³
DECT
Back
OK
Activation
DECT Registration
DECT De-Registration
Eco Mode+
³
³
