elmeg DECT200 Multicell System / en / elmegDECT200M_en / web-conf.fm / 18.10.2013
V
e
rsion 1, 01.0
7
.2012
82
elmeg DECT200 Multicell System
bintec elmeg
Configuring the system on the DECT Manager
Access code
Depending on your PABX settings, you may need to insert an access code before the phone
number for calls outside the area covered by your VoIP PABX (external line prefix, e.g., "0").
¤
Save an access code and specify when the phone numbers should be automatically prefixed
with the digits. You can choose between
All
,
Never
and
from Call Lists
(only when dialling
from the call list or an answering machine list).
¤
Click on
Set
to save your settings on the page.
Activating the area code for local calls using VoIP
On this page, you provide details about the location of your phone. These are used to determine
the international and local area dialling codes as well as country-specific tones (e.g., dialling
tone or ring tone).
Settings
¢
Management
¢
Local settings
Summary of Contents for BinTec Elmeg DECT200
Page 3: ......
