(5)
Finally, put the tray that holds the card back into the device.
Fig. 7:
Inserting the expansion card
(6)
Screw the tray to the device.
Fig. 8:
Screw the tray to the front panel
(7)
Connect the equipment as indicated in section 3.5.1.1 "Connecting". Connect a terminal to the console and veri-
fy that the expansion card has been detected.
3.3 Installation in a rack
The Teldat Atlas-i70 device can be installed in a 19” rack. The necessary strips and screws are not provided by de-
fault and have to be acquired separately.
(1)
First, the maroon side tabs must be removed to free the screws holes:
3 Components and Power Supply
Teldat S.A.
8
Teldat Router Atlas-i70
