J
Eth WAN Base-T. WAN Gigabit Ethernet.
K
Eth WAN SFP.
L
WPS (Wireless Protected Setup). Not supported.
M
RST. Reset button. For further information on how the reset button works, please
see
RST Button
on page 13
N
On/Off switch.
3.2 Expansion Slots
The Teldat Atlas-i70 router has two expansion slots. This allows you to increase the features and interfaces by in-
serting different cards or boards.
These slots are located on the router's front panel, as shown in the following figure:
Fig. 4:
Expansion slots
To correctly insert cards, please follow these steps:
(1)
Switch off the device and remove the data cables as described under section
Disconnecting
on page 11.
(2)
Remove the device from the workplace and place it in a stable, safe location where it can be easily accessed
and handled.
(3)
Unscrew the front panel screws to remove the expansion card tray.
Fig. 5:
Unscrewing the front panel screws
(4)
Once unscrewed, pull the tray out of the front panel slot.
Fig. 6:
Extracting the tray from the front panel
Teldat S.A.
3 Components and Power Supply
Teldat Router Atlas-i70
7
